Cruise control – HONDA 2004 CR-V - Owner's Manual User Manual

Page 124

Advertising
background image

Cruise control may not hold the set
speed when you are going up and
down hills. If your speed increases
going down a hill, use the brakes to
slow down. This will cancel the
cruise control. To resume the set
speed, press the RESUME/accel
button. The CRUISE CONTROL
light on the instrument panel will
come back on.

You can increase the set cruising
speed in any of these ways:

Press and hold the RESUME/
accel button. When you reach the
desired cruising speed, release the
button.

To increase your speed in very
small amounts, tap the RESUME/
accel button. Each time you do
this, your vehicle will speed up
about 1 mph (1.6 km/h).

Push on the accelerator pedal.
Accelerate to the desired cruising
speed and press the SET/decel
button.

You can decrease the set cruising
speed in any of these ways:

Press and hold the SET/decel
button. Release the button when
you reach the desired speed.

To slow down in very small
amounts, tap the SET/decel
button. Each time you do this,
your vehicle will slow down about
1 mph (1.6 km/h).

Tap the brake or clutch pedal
lightly with your foot. The
CRUISE CONTROL light on the
instrument panel will go out.
When the vehicle slows to the
desired speed, press the SET/
decel button.

Changing the Set Speed

Cruise Control

Comf ort and Convenience Features

120

Main Menu

Table of Contents

Advertising