Installing a child seat – HONDA 2004 CR-V - Owner's Manual User Manual
Page 49
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available. (Tethers are required in
Canada.)
After securing the child seat in the
desired position (see page
),
remove the head restraint, then
route the tether strap over the top
of the seat-back.
Remove the tether anchorage
cover with a small flat-tipped
screwdriver or fingernail file, then
attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
Tighten the strap according to the
seat maker’s instructions.
1.
3.
2.
Installing a Child Seat with a
Tether
Using an Outer Anchorage Point
Installing a Child Seat
Driver and Passenger Saf ety
45
TETHER ANCHORAGE POINTS
COVER
TETHER ANCHORAGE POINT
TETHER STRAP HOOK
Main Menu
Table of Contents