Seats – HONDA 2004 CR-V - Owner's Manual User Manual

Page 82

Advertising
background image

To adjust the height of the driver’s
seat, turn the dial on the outside of
the seat bottom.

To change the angle of the rear seat-
back, pull up on the release lever on
the outside of the seat-back.

The rear seat armrest is located in
the center of the rear seat. Pivot it
down to use it.

Each front seat has an armrest on
the side of the seat-back. To use it,
pivot it down.

When using the center seating
position, adjust the left and right side
of the rear seats to the same position.

Make sure all rear shoulder belts are
positioned in front of the rear seat-
backs after you adjust the rear seats.

Only on vehicles with an automatic
transmission

Seats

Instruments and Controls

Driver’s Seat Height Adjustment

Armrests

Rear Seat

78

Main Menu

Table of Contents

Advertising