HONDA 2004 CR-V - Owner's Manual - Manual (Page 48)

After confirming that the belt is
locked, then grab the shoulder
part of the belt near the buckle
and pull up to remove any slack
from the lap part of the belt.
Remember, if the lap part of the
belt is not tight, the child seat will
not be secure.
To remove slack, it may help to
put weight on the child seat, or
push on the back of the seat while
pulling up on the belt.
Push and pull the child seat
forward and from side to side to
verify that it is firmly secured. If
the child seat is not secure,
unlatch the belt, allow it to retract
fully, then repeat these steps.
To deactivate the locking
mechanism and remove a child
seat, unlatch the buckle, unroute
the seat belt, and let the belt fully
retract.
4. 5.
Driver and Passenger Saf ety
Installing a Child Seat
44
Main Menu Table of Contents