Instrument panel – HONDA 2004 CR-V - Owner's Manual User Manual

Page 61

Advertising
background image

This indicator comes on for a few
seconds when you turn the ignition
switch to ON (II). It will then go off
if you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink
and the engine will not start (see
page

).

This indicator also blinks several
times when you turn the ignition
switch from ON (II) to ACCESSORY
(I) or LOCK (0).

This indicator comes on when you
turn the ignition switch to ON (II). If
it comes on at any other time, it
indicates a potential problem with
your front airbags. This indicator will
also alert you to a potential problem
with your side airbags, passenger’s
side airbag automatic cutoff system
or automatic seat belt tensioners.
For complete information, see page

.

This indicator comes on when you
turn the ignition switch to ON (II). If
it comes on at any other time, it
indicates that the passenger’s side
airbag has automatically shut off.
For more information, see page

.

This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II), and when
the ignition switch is turned to
START (III). If it comes on at any
other time, there is a problem with
the ABS. If this happens, have your
vehicle checked at a dealer. With
this on, your vehicle still has normal
braking ability but no anti-lock
brakes. For complete information,
see page

.

27

70

26

149

If equipped

If equipped

Instruments and Controls

Supplemental Restraint
System Indicator

Anti-lock Brake System (ABS)
Indicator

Immobilizer System
Indicator

Side Airbag Of f Indicator

Instrument Panel

57

U.S

Canada

Main Menu

Table of Contents

Advertising