Juniper Systems LandMark CE - Manual (Page 21)

LandMark CE User’s Manual 21
Keyboard Options
To navigate through LandMark CE, use a stylus and tap on the
screen, or press the following keys on the Allegro:
Key Open Screen
F1 GPS Screen
F2 Navigation Screen
F3 Confi guration Screen
F4 Waypoint Screen
F10 COM Port Connect/Disconnect
Navigate within each screen by using the circular arrow key located
in the center of the keyboard.
Use the Tab key for cursor movement between fi elds. When you
are in the desired fi eld, press Enter to select whatever you have
highlighted.
Alt activates the File drop-down menu, and Spacebar checks or
unchecks a box when a dotted line surrounds it.
Press Esc to exit any screen.
F10 ( Com Port Functionality)
LandMark uses F10 as a toggle switch to connect and reconnect the
Com Port. The F10 toggle function works on all the COM Ports that
LandMark CE can connect to. This functionality allows COM Ports
to be manually disconnected and reconnected without having to
close and re-start LandMark CE.
File
The File option is available on the GPS, Navigation, and Waypoint
screen. Tap on File to activate the following drop-down menu.
New
The New option allows you to create a new waypoint fi le.
▲
▲