Juniper Systems LandMark CE - Manual (Page 29)

LandMark CE User’s Manual 29
4 = RTK (Real-Time Kinematic)
5 = RTK (Real-Time Kinematic)
2D/3D
The 2D/3D heading shows the current number of satilite fi xes.
1 = no fi x
2 = 2D fi x (minimum of 3 satelites)
3 = 3D fi x (minimun of 4 satelites)
W1/W2
The W1/W2 heading shows WAAS satelites.
0 = no WAAS
1 = WAAS satellites visible but not used
2 = WAAS satellites used
3 = Visible and used
Note: WAAS enabled receivers receive WAAS corrections, but not
additional satellite information.
Satellite Details
The Satellite Details button within the GPS Diagnostics screen opens
the satellite details screen. Tapping on this screen button displays
a dialog box showing the SV number, azimuth, elevation, signal to
noise ratio, and use status of all GPS satellites in view. When WAAS
satellites are visable, they are shown on Satellite Details screen.
Note: The WAAS satellite information may or may not be shown due
to manufacturer’s specifi cations. Not all receivers pass WAAS satellite
information in the NMEA strings.
Satellite Details Screen
‡
‡