Juniper Systems LandMark CE - Manual (Page 65)

LandMark CE User’s Manual 65
LandMark CE Waypoint Screen Error Messages
The following are the error messages and suggested fi x for those
messages that may occur when using the LandMark CE Waypoint
screen.
Error message:
Waypoint name can be 30 characters or less. Characters
after 30 will be truncated.
This message appears for the following reason:
The allotted number of characters (30) for a waypoint name has
been used.
Fix the problem by making the waypoint name shorter.
Error message:
Maximum number of waypoints per fi le has been reached.
Either create a new waypoint fi le or delete unused
waypoints from the current fi le.
Every waypoint fi le has a maximum number of fi les that can be
entered. This error message appears for the following reason:
The maximum number of waypoints per fi le has been reached.
Fix the problem by creating a new waypoint fi le or by deleting
unused waypoints from the current fi le.
LandMark CE Confi guration Screen Error
Messages
The following are the error messages and suggested fi x for
those messages that may occur when using the LandMark CE
Confi guration screen.
Error message:
Parameter fi le is write protected! Parameter cannot be
changed.
Message appears when a you try to change the confi guration
settings. Changes cannot be made for the following reason:
The Ini File Write Protected box has been checked by the
programmer.
If parameter changes need to be made, the programmer must
uncheck the Ini File Write Protected box. See Programmer’s chapter
for details on how to do this.
▲
1)
1)
▲
1)