Juniper Systems LandMark CE - Manual (Page 46)

46 LandMark CE User’s Manual
DGPS Only
Select the DGPS Only option to collect GPS fi xes with differential
corrections. When selected, all other points that are not DGPS are
masked.
3D Only
Select 3D Only to collect waypoints that are received when using at
least four satellites.
Min Sat Elevation
Select Min Sat Elevation (Minimum Satellite Elevation) and specify
the minimum elevation in the box to the left. Satellites that are equal
to or greater than the elevation value entered are included in the
waypoint averaging.
Min Sat SNR
Select Min Sat SNR (Minimum Satellite Signal to Noise Ratio). A
higher SNR is a better reading. A SNR value less than 4 is considered
unusable. SNR values above the specifi ed value are valid.
HotKeys Tab
Use the HotKeys tab to set up user specifi ed keys that automatically
save a waypoint or send GPS data to a different application when
pressed.
▲