Chapter 3: getting started, 1 starting up, 2 shutting down – KGUARD Security SHA116.V2 User Manual
Page 28: 1 starting up 3.2 shutting down
ENGLISH
Chapter 3: Getting Started
28
DVR User’s Manual
Chapter 3: Getting Started
3.1 Starting Up
1
Connect the power adapter to the DVR. See
“2.2 Connecting the Power” on page 19
for further details.
2
Turn on the power switch on the back panel of the DVR. The DVR automatically powers on and displays the channels
screen.
3.2 Shutting Down
To properly turn off the DVR power, do the following:
1
In the preview mode, right-click on the mouse to display the pop-up menu.
2
Select Main Menu > SYSTEM > MAINTAIN, and double-click Power off.
You can also access the main menu by pressing the MENU button on the remote control or the Menu key on the
front panel.
3
A warning message appears on the screen, select OK to turn off the power.
4
Wait until the “Now you can power off!” message appears on the screen.
5
Turn off the power switch on the back panel of the DVR and then unplug the power cord from the power outlet.