KGUARD Security SHA116.V2 - Manual (Page 72)

ENGLISH
Chapter 5: KGuard Web Client
72
DVR User’s Manual
5.5 Remote Settings
Use the Remote Setting menu to remotely configure the DVR. However, some functions are only accessible if you login
with an administrator account.
On the Main Menu, click Remote Setting to access the Remote Setting page.
Left panel
menu
Settings screen
The Remote Setting menu is divided into six submenu options:
• Display: Allows you to customize how channels are displayed on the monitor screen. See “5.5.1 Setting the
Display” below.
• Record: Allows you to customize the recording settings and schedule. See “5.5.2 Setting the Recording” on page
74 .
• Alarm: Allows you to customize alarms and set when and how you want to be notified. See “5.5.3 Setting the
Alarm” on page 76 .
• Network: Allows you to customize network settings, including email setup. See “5.5.5 Setting the Network
Configuration” on page 78 .
• Device: Allows you to customize settings for the hard disk drive, PTZ speed dome, mobile, and motion detection.
See “5.5.6 Setting the Device” on page 80 .
• System: Allows you to setup user accounts and password, set the system date and time, and view the device
information. See “5.5.7 Managing System Settings” on page 83 .
To access a submenu option, click an item from the left panel. The tree expands to show more options.
5.5.1 Setting the Display
Use the Display menu to remotely customize how you want the channels to be displayed on screen, enable live viewing
and set the window position of a channel. You can also customize the channel name that is displayed on the screen.
1
On the Main Menu, click Remote Setting.
2
On the left panel, click Display.
3
Modify the necessary settings.