KGUARD Security SHA116.V2 - Manual (Page 43)

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
43
4.2.2 PPPoE
The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating Point-to-Point Protocol (PPP)
frames inside Ethernet frames.
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > NETWORK.
3
On Type, select PPPoE.
4
Specify the Media Port and WEB Port numbers.
5
Enter the username (an email address) and password.
6
Specify the DNS Server1/Server2 IP address.
7
After all settings are complete, click Apply.
8
When data saving is complete, click OK.
Note:
The system supports two DNS server input options: DNS Server1 for main server and DNS Server2 for sub server.
Please contact your local ISP (Internet Service Provider) to obtain the correct DNS Server parameter.
4.2.3 Static IP
This option allows you to configure the network interface using a fixed IP address.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > NETWORK.
3
On Type, select Static IP.
4
Specify the Media Port and WEB Port numbers.
5
Specify the static IP address, Netmask, Gateway, and DNS Server1/Server2 IP addresses.