KGUARD Security SHA116.V2 - Manual (Page 79)

ENGLISH
Chapter 5: KGuard Web Client
DVR User’s Manual
79
Setting Up with PPPoE
If your network uses the Point-to-Point Protocol over Ethernet (PPPoE), do the following:
1
On the Main Menu, click Remote Setting.
2
On the left panel, click Network > PPPoE. The PPPoE screen appears.
3
Enable PPPoE.
4
Enter the User Name and Password.
Note:
Obtain these information from your network administrator or your Internet Service Provider (ISP).
5
To save, click Apply at the bottom of the screen.
« TIP »
• To revert to default settings, click Default at the bottom of the screen.
• To cancel any modifications and retain the existing settings, click Refresh at the bottom of the screen.
Setting Up DDNS
DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with a DDNS server so that
the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.
To use this feature, you must have a DDNS account. Obtain the information from your Internet Service Provider (ISP) or
create a free DDNS account with KGuard.org server, visit the website
http://www.kguard.org .
To setup DDNS, do the following:
1
On the Main Menu, click Remote Setting.
2
On the left panel, click Network > DDNS. The DDNS screen appears.
3
Enable DDNS.
4
On Service, select the DDNS server.