KGUARD Security SHA116.V2 - Manual (Page 60)

ENGLISH
Chapter 4: Using the DVR
60
DVR User’s Manual
4.5.3 Video and Audio Settings
The VIDEO menu allows you to configure the video and audio output settings, including the setting of Privacy Zone
which is used to hide an area on the screen from being viewed.
Setting the Video Output
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > SYSTEM > VIDEO.
3
Modify the necessary settings.
Menu Item Description
Video System Select the video system used in your location (NTSC/PAL).
Video Output Select LIVE-OUT or SPOT-OUT to configure the video output setup. This item is available
only in 16-channel model. See “Setting LIVE-OUT View Setup (16-Channel DVR only)”
below or “Setting SPOT-OUT View and Audio Setup (16-Channel DVR only)” on page
61 .
Rotate Time Set the interval time in seconds when changing screen display in Auto Switch mode. See
“3.4.5 Auto Switch View” on page 35 . Rotate time is available only if View Setup is
disabled.
View Setup Enable or disable the display sequence setting. This item is available only in 16-channel
model.
VGA
Resolution
Select the output resolution.
OSD Output Select where you want to display the OSD menu when multiple monitors are connected
to the DVR (BNC Out, VGA, or Auto).
4
Click Edit.
Setting LIVE-OUT View Setup (16-Channel DVR only)
This function allows you to fix the number of channels displayed in split mode and order the display sequence of
channels when viewing in live mode.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > SYSTEM > VIDEO.
3
In Video Output, select LIVE-OUT.
4
In View Setup, select Enable.
Note:
When View Setup is enabled, Split Windows function is not available (see “3.4.2 Split Mode” on page 34 ).
5
In View Mode, select how you want to split the window, options are: Single, Quarter, Ninth, Sixteenth.