KGUARD Security SHA116.V2 - Manual (Page 61)

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
61
6
Click VOUT Sequence Setup and select the sequence of channels to display.
7
After all settings are complete, click Apply.
8
When data saving is complete, click OK.
Setting SPOT-OUT View and Audio Setup (16-Channel DVR only)
This function allows you to set the display sequence of channels when viewing in live mode.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > SYSTEM > VIDEO.
3
In Video Output, select SPOT-OUT.
4
In View Setup, select Enable.
5
In View Mode, select how you want to split the windows, options are: Single, Quarter, Ninth.
6
Click SPOT Sequence Setup and select the sequence of channels to display.
7
After all settings are complete, click Apply.
8
When data saving is complete, click OK.
9
To bind a SPOT audio channel with the current video channel, select the audio channel to bind in SPOT Audio.
10
After all settings are complete, click Apply.
11
When data saving is complete, click OK.
Setting the Volume
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > SYSTEM > VIDEO.
3
Click Volume.
4
Drag the slider bar to adjust the output volume.
5
Click X to close the volume bar.
6
Click Apply to save volume settings.
7
When data saving is complete, click OK.