Neuspeed 66.10.95 User Manual

Short shift kit

Advertising
background image

NEUSPEED

• 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX

Visit us on the web…http://www.neuspeed.com & http://www.apsoutlet.com


SHORT SHIFT KIT

2006.5-up VW RABBIT, GOLF VI, JETTA V & VI, BEETLE with 2.5L – PART # 66.10.95

With OEM shifter #1K0 711 051 K / M

5-SPEED MANUAL TRANSMISSIONS ONLY

INSTALLATION INSTRUCTIONS

PART LIST:

1 – SHORT SHIFT LEVER

TOOLS REQ:

1 – 13mm SOCKET

1 – RATCHET HANDLE

1 – 6” OR LONGER EXTENSION

1.

Remove clip on end of shifter cable and remove cable that attaches to shift lever.


2.

Unbolt gear shift lever from selector shaft using a 13mm socket – remove lever.


3.

Grease guide rail on NEUSPEED® Short Shift Lever. Install shifter by first installing guide
rail in white plastic guide. Then match up splines on selector shaft – note wide alignment
spline
. Install lock nut and torque to 20 ft./lbs.


4.

Grease pin on shift lever and attach cable. Re-attach retaining clip.


5.

Carefully double-check complete installation to be sure nothing interferes with the shift
linkage, tightness of all nuts and bolts, and check that ALL gears engage smoothly and fully
BEFORE STARTING ENGINE OR TEST DRIVING!






©Copyright 2005, NEUSPEED

®

. All rights reserved. Reproduction in whole or in part prohibited.

DOC.66.10.92/66.02.65 Rev. 04.26.07

Advertising