RED 3-AXIS LENS CONTROL SYSTEM - Manual (Page 10)

COPYRIGHT © 2014 RED.COM, INC
RED 3-AXIS SYSTEM OPERATION GUIDE
955-0044, REV-D | 10
02
This section offers condensed installation and operating instructions to help you get started using the
RED 3-Axis Lens Control System. For more detailed information on specific components, please refer to the
respective chapter in this guide.
WARNING: The DSMC
® BRAIN ® must be powered off during any installation process.
RECOMMENDED EQUIPMENT
The following RED products are suggestions for use, or are used to depict operations within this section:

12 - 18 V DC power source
‒ AC Power Adaptor (DSMC) with REDVOLT ® XL Module
‒ RED Quickplate (Short) Module with attached RED BRICK ®
‒ Backpack Quickplate (Short) with attached RED BRICK
 Mounting platform
‒ DSMC Tactical Cage
‒ DSMC Tactical Right Plate

Mounting system
‒ DSMC Modular Assault Plate Pack
‒ Quick Release Platform or Quick Release Platform (Mini)

15mm or 19mm support rods
‒ RED CARBON-X Rod (Carbon Fiber)
‒ Black Rod (Aluminum)
‒ Steel Rod (Steel)
NOTE: For more information and other compatible products, visit the RED Store at www.red.com/store .
3-AXIS SYSTEM
LAUNCH SEQUENCE