RED 3-AXIS LENS CONTROL SYSTEM - Manual (Page 55)

COPYRIGHT © 2014 RED.COM, INC
RED 3-AXIS SYSTEM OPERATION GUIDE
955-0044, REV-D | 55
C
This appendix provides RED 3-Axis Lens Control System pinout information for the Wireless Motor Driver,
Tactical Hand Controller, Lens Control Motor as well as RED ® connector cables that are used with the system
components.
NOTE: When connecting a cable to a connector, align the key and red marker on the cable connector with the
corresponding key and marker on the device connection.
NOTE: Connector diagram images are for reference only. Diagrams are not to scale.
W.M.D. CONNECTORS
1
2
3
4
5
6
7
# CONNECTOR CONNECTOR TYPE CONNECTOR FUNCTION
1 FOCUS 7-pin 1B LEMO Lens motor drive support; Focus control knob on T.H.C.
2 IRIS 7-pin 1B LEMO Lens motor drive support; Iris control knob on T.H.C.
3 ZOOM 7-pin 1B LEMO Lens motor drive support; Zoom control slider on T.H.C.
4 CAN 4-pin 0B LEMO CAN communication and power for the T.H.C.
5 EXP 14-pin 1B LEMO Start/Stop, Tally, RS-232, GPIOs
6 232/422 10-pin 1B LEMO RS-232/422 communication
7 PWR 2-pin 1B LEMO 12 V to 18 V power
W.M.D. Connections
CONNECTOR AND
CABLE PINOUTS