RED 3-AXIS LENS CONTROL SYSTEM - Manual (Page 15)

RED 3-AXIS SYSTEM OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0044, REV-D | 15
CONFIGURE LENS CONTROL MOTORS
The W.M.D. features a number of adjustments in the Focus, Iris, and Zoom menu topics to fine-tune specific
motor/lens combinations. After initializing the system, you may need to adjust the following settings:
 Torque

Direction

Type/Model

Backlash

Endstop
NOTE: For more information, go to “Configure Focus, Iris, and Zoom Motors” on page 24 .
METADATA AND LENS PROFILES
The microSD slot on the W.M.D. is used to update firmware, as well as save and share modified lens profiles
that allow you to view real-time metadata on the W.M.D. This guide offers information on the following topics:

Select a Lens Profile

Modify a Lens Profile
 Clear the Active Lens Profile

View Lens Metadata

Export Lens Profiles
 Import Lens Profiles
NOTE: For more information, go to “W.M.D. Lens Profiles” on page 28 .
LENS LIMITS AND LENS LOCKS
The T.H.C. features several convenient and easy-to-use features for precision wireless control. This guide offers
information on the following topics:

Set a Lens Limit

Remove a Lens Limit

Set a Lens Lock

Remove a Lens Lock
NOTE: For more information, go to the chapter “Tactical Hand Controller (T.H.C.)” on page 32 .