T.h.c. controls, Red 3-axis system operation guide – RED 3-AXIS LENS CONTROL SYSTEM User Manual
Page 33
RED 3-AXIS SYSTEM OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC
955-0044, REV-D | 33
T.H.C. CONTROLS
2
1
3
4
6
5
8
7
9
10
#
CONTROL
DESCRIPTION
1
Run button
Record button for mobile Start/Stop
2
Iris slider
1
Adjusts motor connected to Iris port
3
Zoom wheel
1
Adjusts motor connected to Zoom port
4
Initialize button
Press and hold for two (2) seconds to initialize the system;
OR press and release to initialize only motors unknown positions
(Must be paired or connected via CAN cable)
5
Power switch
Toggles power source from cabled to battery mode
6
Zoom Limit button
Hold down to set the “zoom” lens limit or lens lock
7
Focus wheel
1
Adjusts motor connected Focus port
8
Iris Limit button
Hold down to set the “iris” lens limit or lens lock
9
Focus Limit button
Hold down to set the “focus” lens limit or lens lock
10 Eject battery release
Press to release the rechargeable battery from the T.H.C.
1. Focus, Iris, and Zoom controls can be used interchangeably by connecting the Lens Control Motor to the desired lens function connec-
tor on the W.M.D.
T.H.C. Controls
T.H.C. Controls