Wireless motor driver (w.m.d.), W.m.d. overview, Red 3-axis system operation guide – RED 3-AXIS LENS CONTROL SYSTEM User Manual
Page 16
COPYRIGHT © 2014 RED.COM, INC
RED 3-AXIS SYSTEM OPERATION GUIDE
955-0044, REV-D | 16
03
W.M.D. OVERVIEW
The RED
®
Wireless Motor Driver (W.M.D.) is the brain of the RED 3-Axis Lens Control System. The W.M.D.
receives control signals from the RED Tactical Hand Controller (T.H.C.) to drive up to three (3) RED
Lens Control MotorS. With the W.M.D., you can adjust the following settings for each motor:
Torque
Direction
Type/Model
Backlash
Endstop
R3D metadata integration is a standard on the W.M.D., allowing your recorded lens control information to carry
over into post-production. Expansion ports, tool-free installation, and start/stop connectivity make the W.M.D.
versatile and easy-to-use.
NOTE: DO NOT USE the Pro I/O Module to power the RED W.M.D. The Pro I/O Module does not provide enough
power and is not designed to support the W.M.D.
NOTE: For more information on compatibility, go to
“3-Axis System Compatibility” on page 54
.
NOTE: Go to the
for the latest firmware version, operation
guide, and other support resources.
RED W.M.D.
WIRELESS MOTOR
DRIVER (W.M.D.)