RED 3-AXIS LENS CONTROL SYSTEM - Manual (Page 64)

COPYRIGHT © 2014 RED.COM, INC
RED 3-AXIS SYSTEM OPERATION GUIDE
955-0044, REV-D | 64
RED LENS CONTROL MOTOR CABLE (3.3KΩ VERSION)
The RED Lens Control Motor Cable (3.3KΩ Version) provides a 7-pin 1B to 7-pin 1B LEMO cable used to con-
nect RED Lens Control Motors to compatible third-party motor drivers. This cable provides a 3.3k ohms (Ω)
resistance identification to the motor driver. Cables are available in 18" and 24".
NOTE: The RED Lens Control Motor is also compatible with third-party systems using the appropriate RED mo-
tor cable with the proper internal identification resistor.
NOTE: For more information, go to
“Compatible Motor Drivers” on page 54 , or visit the RED Store at http://
www.red.com/store .
W.M.D. LENS CONTROL MOTOR
FGG-1B.307.CLAD62Z FGG-1B.307.CLAD62Z
PIN SIGNAL WIRING PIN SIGNAL
1 Motor (+) 1-1 1 Motor (+)
2 Motor (-) 2-2 2 Motor (-)
3 Encoder A 3-3 3 Encoder A
4 +5 V 4-4 4 +5 V
5 GND 5-5 5 GND
6 Encoder B 6-6 6 Encoder B
7 Motor ID 7-7 7 Motor ID
RED Lens Control Motor Cable
(3.3KΩ VERSION)