Tactic TTX650 6-Ch SLT Computer - Manual (Page 13)

13
From the home screen, press and hold ENTER for 2 seconds
to fi nd the MODEL SETUP menu which is for setting of
fundamental operating parameters as shown here.
MODEL SELECT
Memories are available to store parameters for up to 20 different models. This screen is
for selecting the model to be active. Move the cursor to fi nd the desired model to make
active, and press ENTER. You will be forced to select a model type (airplane or heli).
The radio will automatically return to the home screen.
Changing the model memory is not possible if the Tx battery
voltage is too low. See the INPUT POWER section on page
5. It’s a good idea to keep a record of all settings for each
memory as a backup in case parameters in a particular
memory are accidentally changed, etc.
MODEL MANAGEMENT
Shows basic information regarding
the model setup in the memory
number shown at top in brackets.
Move the cursor up or down to select
/ change the function to adjust, and
press ENTER to enter the function
screen.
Type: Press or to select the
model type as airplane or helicopter.
Press ENTER to confi rm.
Name: Move the cursor to this line and press ENTER. The method for setting the
model name is the same as for entering the USER NAME as described on page 11. The
maximum number of characters is six. Press ESC when fi nished.
MODEL SETUP MENU – AIRPLANES
MODEL SELECT
MODEL MANAGEMENT
WING TYPE
CHANNEL ASSIGNMENTS
WARNINGS
MODEL SETUP
02: Axe100
03: Extra
04: Cirrus
05: Novus
06: Yak-54
01: GeeBee
MODEL
SELECT
Mode1 Management[01]
Type: Airplane
Name:
Copy
Reset
Erase
GeeBee
MODEL TYPE
AIRPLANE HELICOPTER