Tactic TTX650 6-Ch SLT Computer - Manual (Page 26)

26
1AI1FL: Highlight the FLAP  ELEV mix percent and adjust as desired. Press ENTER
when fi nished. Assigning a switch can allow on/off control of the mix. Set a mix percentage
for each position of the switch (SP.0, SP.1, SP.2).
2AI1FL: If this wing type was set, the fl ap channel can be mixed with the aileron, elevator,
or back to the fl ap. Set the mix percent for each channel to be mixed, for all switch positions
that control the mix. Do NOT assign a switch at the CTRL line to make the mix active at
all times. Press ENTER when done.
AIR BRAKE SET
This function will allow you to defi ne
the air brake position and activate it
with a switch.
When the 1AI1FL wing type is
selected the brake can be mixed to
elevator and/or fl aps. Adjust each
mix percentage as needed. Select
a switch to turn the mix on/off.
Normal Switch Control
FLAP->ELEV MIXING
CTRL:-----
FLAP->ELEV MIXING
Elev Flap
NORM: 0% 0%
Elev Flap
SP.0: 0% 0%
SP.1: 0% 0%
SP.2: 0% 0%
CTRL:SC(2)
Flap to aileron mixing,
no control switch set Flap to elevator mixing,
set with 3 position switch
FLAP->AILE MIXING
Aile Elev Flap
NORM: 0% 0%+100%
CTRL:-----
FLAP->ELEV MIXING
Aile Elev Flap
SP.0: 0% 0%+100%
SP.1: 0% 0%+100%
SP.2: 0% 0%+100%
CTRL:SC(2)
1 Ail, 2 Ail,
1 Flap 2 Ail 1 Flap
Brake to Elev X X
Brake to Ail X
Brake to Flap X X
AIR BRAKE SET
ELEV: 0%
FLAP: 0%
CTRL:SE