Tactic TTX650 6-Ch SLT Computer - Manual (Page 24)

24
Normal: To make AILE DIFFERENTIAL active at all times do NOT assign a switch at
the CTRL line. Press ENTER to highlight the differential rate percent and press or
to fi nd the desired value. Press ENTER when fi nished.
Switch Control: To control the mix with a switch, move the cursor to the CTRL line
and press ENTER. Defl ect the switch that will control the mix. The screen will show the
functional assignments for each position of the switch as described previously. Press ESC
to confi rm the switch selection. The display will now show the different switch positions
(SP.0, SP.1, SP.2). A different rate can be set for each switch position.
Defl ect the switch to one position, and note the cursor on-screen will move automatically
to the rate for that position. Adjust that rate as desired. Defl ect the switch to the remaining
positions and repeat. To remove a switch which might have been assigned previously,
highlight the switch selection in the CTRL line and press CLEAR.
Press ESC once all mixing values are set to return to the FUNCTION menu screen.
AILERON MIXER
Normal Ail > Rudd X X X X
Delta Ail > Rudd X X
1 Ail, 2 Ail,
Tail type Mixing 1 Ail 1 Flap 2 Ail 1 Flap
The aileron channel can be mixed to the rudder channel, which can be useful with certain
wing/airplane types.
To make this AILE  RUDD mix active at all times do NOT assign a switch at the CTRL
line. Adjust the mixture percentage and press ENTER.
On/off control of this mix can be assigned to a switch. Set the mix rates as desired for
each switch position. Press ESC when fi nished.
AILE DIFFERENTIAL
Aile
NORM: 0%
CTRL:_____
AILE DIFFERENTIAL
Aile
SP.0: 0%
SP.1: 0%
SP.2: 0%
CTRL:SC(2)
Normal Switch Control
AILE->RUDD MIXING
Rudd
NORM: 0%
CTRL:-----
AILE->RUDD MIXING
Rudd
SP.0: 0%
SP.1: 0%
SP.2: 0%
CTRL:SB(0)