Tactic TTX650 6-Ch SLT Computer - Manual (Page 28)

28
RF OUTPUT
The Rf output signal can be turned on or off. If changing any
programming parameters in the radio it’s recommended to
turn the Rf off to conserve radio power. Leave the Rf output
signal ON anytime the model is being controlled.
Enter this screen to perform a range check on the radio
system, as fully explained on page 39.
TIMER
A timer is shown on the home screen, which can be confi gured in the TIMER menu. The
timer can be set to count up or down, and can be controlled by a user assigned switch.
In addition, the timer can be controlled by the throttle stick if desired.
To count UP as a stopwatch, leave the timer set to 00:00. To confi gure the timer to count
DOWN, set a time other than 00:00 with a maximum possible start time of 99:59. When
used as a countdown timer, a set of tones will sound at 00:10 and every second thereafter
to warn that the timer is nearing the end. After reaching 00:00, the timer will automatically
begin counting up to help track how much longer the model was operational after the
timer ended.
A switch can be selected on the right side
of the screen to turn the timer on / off. Place
the box on-screen over this setting and
defl ect the switch that will control the timer.
In operation, the timer will be stopped when
the switch is in one position. Moving the
switch to the opposite position will cause
the timer to count. To reset the timer, move
the switch to the stop position and press
the CLEAR button.
The timer can also be started and stopped by the throttle stick. Move the throttle stick
to the minimum throttle position. Place the box on-screen over the switch setting and
press ENTER. When “Choose the control switch” displays, move the throttle stick up
from minimum throttle.
RF OUTPUT
RF ON/OFF: ON
RANGE TEST:99sec
Timer
: T1 01:00
TxBatt 08:12:40
SBOFF
> 01
5.3V
1 OO
RF-ON
Timer
: T1 01:00
TxBatt 08:12:40
SBOFF
Optional
Selections:
SA, SB,
SC, SD,
SE, SF,
SH