Toa VM-3000 Series - Manual (Page 110)

110
VM-3240VA/3360VA RM-300MF VM-3240VA/3360VA RM-200M
• When installing a second or subsequent remote microphones or an expansion unit of the RM-320F or RM-
210, a separate power supply unit is required. In this case, An AC adapter can be used for the RM-
200M/210, and an AC adapter or the VX-2000DS for the RM-300MF/320F.
VM-3240VA/3360VA RM-300MF VM-3240VA/3360VA
AC adapter
RM-300MF RM-320F
RM-200M
AC adapter
14.3. Remote Microphone Connections
14.3.1. Power supply and limit on the number of remote microphones
The number of remote microphones connectable in a system is as follows.
• Up to 2 RM-300MFs can be connected to the VM-3240VA/3360VA. Besides, up to 4 RM-200Ms and RM-
300MFs in total can be connected.
• Up to 3 RM-320Fs can be connected to the RM-300MF, and up to 4 RM-210s to the RM-200M.
The method of power supply to the remote microphones differs depending on the system application and
configuration, and also type of remote microphone. In a system configuration, the allowable number of the
microphones connected to the VM-3240VA/3360VA may be limited.
[Power supply to the remote microphones]
Note
Red lines are DC power lines.
• The VM-3240VA or the VM-3360VA can supply power to a single RM-300MF or RM-200M only.