Toa VM-3000 Series - Manual (Page 93)

93
Step 2. Connect the link cable to the screw terminal block.
For cable connection, refer to "RM-300MF connection" on page 112.
Wall mount bracket unit
(supplied with the RM-300MF)
Bracket A
Bracket B
Link cable
Note
Put the link cable inside the Bracket A after
connection completion.
Do not allow the link cable to protrude.
The cable may be damaged if it protrudes when
the bracket unit is installed onto the wall.
Step 3. Plug the RM-300MF's connection cable into the connector port on the wall mount bracket unit.
Step 4. Attach the RM-300MF unit to the wall mount bracket unit.
Note
When attaching the RM-300MF unit, check that
the extension connector is not pinched.
4
Connection cable
RM-300MF
Wall mount bracket unit
(supplied with the RM-300MF)
3