Toa VM-3000 Series - Manual (Page 33)

33
Step 1. Press the Emergency Activation switch.
The Emergency indicator (Emergency Activation
switch) lights red and the VM-3360VA or VM-
3240VA is placed in emergency broadcast mode.
The indication requesting broadcast output selection
is displayed on the LCD.
Step 2. Press the All-Zone Selector key or Output Selector
key to select the broadcast zones.
•
Pressing the All-Zone Call Selector key causes
the All-Zone Call indicator to light green, allowing
emergency broadcasts to be made over all
broadcast zones.
•
Pressing the Output Selector key causes the
selected Output indicators to light green, allowing
emergency broadcasts to be made over the
corresponding broadcast zone(s).
Note
Skipping Step 2 allows emergency broadcasts to be made
over all zones, as if the All-Zone Call Selector key was
pressed.
All-zone Call Selector key
Emergency Activation switch/Emergency indicator
All-zone Call indicator
Output Selector key
Output indicator
LCD screen
Emergency
microphone
Emergency Output indicator
Emergency microphone operation indicator
[VM-3240VA/3360VA]
N o r m a l s t a t u s
E M E R G E N C Y
S E L E C T O U T P U T
E M E R G E N C Y
S E L E C T O U T P U T
B r o a d c a s t z o n e
s e l e c t i o n r e q u e s t
s c r e e n
B r o a d c a s t z o n e
s e l e c t i o n r e q u e s t
s c r e e n
or
1
ALL OUTPUT 1 – 6
2
EMERGENCY
6.1. Making Emergency Broadcasts from the VM-3240VA or VM-3360VA
6.1.1. Microphone announcements
Use the emergency microphone located on the front panel of the VM-3360VA or VM-3240VA.