Toa VM-3000 Series - Manual (Page 71)

71
Step 5. Press the OK key when the underline is at the rightmost digit to register the IP address.
Step 6. Press the Cancel key after setting is complete.
The display reverts to the Network Settings screen.
<Subnet mask settings>
Step 7. Press the OK key on the Network Settings screen.
The IP Address settings screen is displayed.
Step 8. Press the Menu key.
The Subnet Mask Settings screen is displayed.
Step 9. Enter the subnet mask using the [+] and [–] keys.
The underline (_) shown at the leftmost digit indicates the entry point.
Step 10. Press the OK key. The underline moves to the next (right side) digit.
Note
Pressing the Cancel key returns the display to the previous screen.
Step 11. Repeat Steps 9 and 10 to complete the subnet mask.
Step 12. Press the OK key when the underline is at the rightmost digit to register the subnet mask.
Step 13. Press the Cancel key after setting is complete.
The display reverts to the Network Settings screen.