Toa VM-3000 Series - Manual (Page 37)

37
Step 1. Press the RM-300MF’s Emergency Activation switch.
The Emergency indicator (Emergency Activation switch) lights red, placing the unit in emergency
broadcast mode.
Step 2. Press the RM-320F Fireman’s Microphone Extension’s Zone Selector key(s) to select broadcast
zone(s).
The selected zone’s indicator lights green, indicating that emergency microphone announcements
can be broadcast over the selected zone.
Notes
• The RM-320F Fireman’s Microphone Extension is an optional device. If the Fireman’s Microphone
Extension is not connected, emergency announcements are broadcasts over all broadcast zones.
• Use the setting software to set the Zone Selector key. (Refer to "Event Settings" "RM Function
Settings" "RM-320F Settings" in the separate software instruction manual.)
• If Step 2 is skipped and the broadcast zone is not selected, emergency announcements are
broadcast over all broadcast zones.
Step 3. Make emergency broadcasts by pressing the Talk key of the RM-
300MF’s emergency microphone.
During the emergency microphone announcement, the RM-300MF’s
Emergency Microphone In-Use indicator lights green and the RM-320F
Fireman’s Microphone Extension’s Emergency Broadcast Zone indicator
lights red.
[RM-320F] [RM-300MF]
Emergency Activation switch/Emergency indicator
Zone Selector key
Zone indicator
Emergency Broadcast Zone
indicator
Emergency
microphone Emergency Microphone In-Use indicator
Talk key
6.2. Making RM-300MF Emergency Broadcasts
6.2.1. Microphone announcements
Make emergency broadcasts through the emergency microphone of the RM-300MF Fireman’s Microphone.