VACUUBRAND VACUU·CONTROL - Manual (Page 24)

Installation and connection
24 BA-N°: 999279/17.10.2014
4 Installation and connection
VACUU•CONTROL ® is a web-based remote control, displayed in
a web browser. No installation via data medium is required.
The adapter contains the complete software required to display
the VACUU·CONTROL ® remote control on your end device.
VACUU·CONTROL ® WLAN or VACUU·CONTROL ® LAN are con-
nected directly to the sub-D connection of your CVC 3000.
Connection to the CVC 3000 controller can be made in any of
several ways, depending upon the design configuration of your
pumping unit.
4.1 Holder for WLAN-Adapter
Attaching holder for WLAN adapter
1. Remove protective foil from one side of the adhesive tape.
2. Attach the adhesive tape centered on the rear side of the
holder.
3. Remove the second protective foil from adhesive tape.
IMPORTANT! Attach the holder for WLAN adapter in a way
that its cable can be connected to CVC 3000
loosely and without tightening.
Recommended holder position: for large
pumping units attach holder on the rear
side and for pumping units attach like in the
illustrated example on the side in the rear.
Adapter function
Web-based
application
Connection of
CVC via sub-D
 Example:
Attaching holder to
PC 3001 VARIO