VACUUBRAND VACUU·CONTROL - Manual (Page 38)

Operation
38 BA-N°: 999279/17.10.2014
 Example
Enter
IP address
6 Operation
The VACUU•CONTROL ® application uses a web browser on
your web‑enabled end device to show synchronized data from
your CVC 3000 vacuum controller.
Knowledge of the function and operation of the CVC 3000 are
basic requirements for using the VACUU•CONTROL ® application
and hardware to control the CVC 3000 remotely.
IMPORTANT! Read instructions for use of the CVC 3000
or your pumping system before using remote
control!
6.1 Starting VACUU•CONTROL ® application
Open default view
1. Start the web browser of your end device.
2. Enter the IP address 1 into the address bar of your web
browser.
192.168.1.111
VACUUCONTROL
3. Confirm your input with the Enter key.
5
VACUU·CONTROL ® is displayed.
or
Open up by bookmark
1. Start the web browser of your end device.
2. Click on the bookmark of the controller you want to monitor/
control by remote control.
( also see chapter: “4.3.4 Creating bookmarks”)
5
VACUU·CONTROL ® is displayed.
1 -> Ask your system administrator for an assigned IP address or enter the facto-
ry set IP address: “192.168.1.111” or enter the device name: “VACUUCONTROL”