VACUUBRAND VACUU·CONTROL - Manual (Page 66)

Resolving problems
66 BA-N°: 999279/17.10.2014
8 Resolving problems
NOTICE
Possible material damage due to improperly executed
troubleshooting.
Technical support
> To identify errors and potential remedies, please refer to the
troubleshooting table: “Fault – Possible cause – Remedy“.
In case you need additional assistance, please contact our
Service department.
8.1 Error display
8.1.1 External errors
Error messages from the vacuum system are displayed both
on the CVC 3000 controller and on the VACUU•CONTROL ®
interface.
User interface in case of external errors
1
2
1 Red title bar
2 Display symbol in case of malfunction (within the bar graph)
Technical support
 Example
User interface
(GUI) in case of
malfunction