VACUUBRAND VACUU·CONTROL - Manual (Page 58)

Network configuration and updates
58 BA-N°: 999279/17.10.2014
7 Network configuration and updates
CAUTION
Communication abort due to incorrect network
configuration.
Incorrect network configuration causes connectivity
problems between the VACUU•CONTROL ® adapter
and your end device.
>
Do not change network configuration parameters.
Seek help from a network administrator.
>
Do not change network settings during operation.
Connection loss during update.
Remote process control is not possible while updating.
>
Never perform an update while operating your pump.
Malfunction/failure of remote control or CVC 3000.
Interrupting an update, e.g., by aborting the update or
by starting the same update from different end devices,
may cause failure of the remote control or of your
CVC 3000.
>
Never attempt to update the CVC 3000 from multiple
web-enabled devices at the same time.
>
Always wait until the update has been completed.
Network configuration and updates are assigned to the ‘Ad-
min’ user, providing unrestricted access to VACUU•CONTROL ®
remote control.
For initial login the password is factory‑set to “
admin“. After log-
ging in using the default password, the Administrator should
change the password.
IMPORTANT! > Protect “Network configuration“ and “Update“
from unauthorized access.
> Change password immediately after initial
login.
Network
configuration
 Example
Login/input mask
web browser