VACUUBRAND VACUU·CONTROL - Manual (Page 26)

Installation and connection
26 BA-N°: 999279/17.10.2014
CVC 3000 – pumping unit
1. Switch off your pumping system,
ON/OFF switch in position 0.
2. Connect the sub-D plug of the adapter to the sub-D
connection at the rear of the pumping unit.
Also valid for pumping units with an integrated controller:
PC 3002 VARIO, PC 3003 VARIO, PC 3004 VARIO, PC 510
NT, PC 511 NT, PC 610 NT, PC 611 NT.
An additional RC adapter is required for: PC 520 NT,
PC 620 NT (for the second CVC 3000).
3. Connect the sub-D plug of a second adapter to the sub-D
connection at the rear of the laterally mounted CVC 3000.
4. Fix the sub-D plugs with screws.
5
CVC 3000 prepared.
>
The sub-D connection of a pumping unit with integrated
or mounted CVC 3000 is located at the rear side of the
pumping unit;
 see lower circle in above figure.
 Example:
Position of sub-D
connections with
2x CVC 3000
Larger vacuum
systems
(pumping units)