Winco DGC-500 User Manual
Page 13
Advertising
![background image](/manuals/716093/13/background.png)
DGC-500 HMI
2-1
Figure 2-1. DGC-500 Front Panel HMI
SECTION 2 • HUMAN-MACHINE INTERFACE
INTRODUCTION
This section describes the components of the DGC-500 human-machine interface (HMI). DGC-500 HMI
components are located on the front panel (controls and indicators) and the rear panel (terminals and
connectors).
FRONT PANEL
Figure 2-1 illustrates the front panel HMI of the DGC-500. Table 2-1 lists the call-outs of Figure 2-1 along with
a description of each HMI component.
Advertising