Winco DGC-500 User Manual
Page 91
DGC-500 Maintenance and Troubleshooting
6-2
Programmable Inputs Do Not Operate as Expected
Step 1.
Verify that all wiring is properly connected. Refer to Figures 5-5 through 5-7.
Step 2.
Confirm that the inputs are programmed properly.
Step 3.
Ensure that the input at the DGC-500 is actually connected to the BATT– terminal (P21).
Programmable Outputs Do Not Operate as Expected
Step 1.
Verify that all wiring is properly connected. Refer to Figures 5-5 through 5-7.
Step 2.
Confirm that the outputs are programmed properly.
Communication Port Does Not Operate Properly
Step 1.
Verify that the proper port of your computer is being used.
Step 2.
Confirm that the correct baud rate is being used.
Step 3.
Verify that the connection between the computer and the DGC-500 is correct. Ensure that a
straight-through serial cable is being used.