Winco DGC-500 - Manual (Page 73)

DGC-500-500 BESTCOMS Software 4-19
Figure 4-24. Firmware File Information
Figure 4-25. File Transfer Status
3. Click the Select New Application Code button and then navigate to and select the file (S19 file
extension) to be used for updating the DGC-500 firmware. The file details are displayed in the File
Information section of the Embedded Firmware Upgrade dialog box (Figure 4-24).
4. Click the Start Firmware Upgrade Process button. The Erase Application Code!!!! and Save Settings
Before You Continue!!!! dialog boxes appear and confirm that you want to continue. Click Yes in both
dialog boxes to begin transferring the firmware file to the DGC-500. The file transfer status is displayed
in the Embedded Firmware Upgrade dialog box (Figure 4-25).
5. Once the file transfer is complete, close the Embedded Firmware Upgrade dialog box, open
communication between the PC and DGC-500, and gain password access to the DGC-500 with the
appropriate password.