Winco DGC-500 - Manual (Page 59)

DGC-500 BESTCOMS Software 4-5
Figure 4-7. Pre-Alarm Screen, Low Fuel-Low Cool-Batt. OverVolt Tab
Figure 4-8. Pre-Alarm Screen, Low Oil-Low Batt Volt-Weak Batt Volt Tab
Low Oil-Low Batt Volt-Weak Batt Volt Tab
The Low Oil-Low Batt Volt-Weak Batt Volt Tab settings are shown in Figure 4-8. Each tab setting is described
in the following paragraphs.
Low Oil Pressure Pre-Alarm - Enable. This setting enables and disables annunciation of a low oil pressure
pre-alarm. A 10 second activation time delay prevents low oil pressure annunciation during engine startup.