YSI 9600 - Manual (Page 8)

• Large, non-volatile memory for data storage.
• System can be used at depths up to 200 feet.
• All firmware and software is user-upgradeable via the YSI Web page.
SECTION 2 GETTING STARTED
This section is designed to quickly familiarize you with the hardware and software components of the YSI
9600 and its accessories. By the end of Section 2 you will have...
2.1
UNPACKING
When unpacking your 9600 Nitrate Monitor, be certain not to discard any parts or supplies that were
supplied with the instrument. As you proceed through the unpacking process, use the packing list
(available immediately after opening the box) to ensure that all items are included. Finally, be sure to
inspect all assemblies and components for damage. Proceed by the following steps to unpack the 9600:
• Open the flaps at the top of the box and remove the packing list and sealed information packet which
contains several items, including the manual and the software necessary to interface with the 9600 and
analyze the data, and set the items aside.
• After removing the cardboard tray that contains the information packet, remove the 9600 from the
shipping box by grasping the bail and pulling straight up as shown in the picture below. It may be
prudent to have two people present for this initial unpacking step: one to lift the instrument by the bail
and another to pull the box from the assembly. Note carefully that the 9600 weighs approximately 30
pounds with no chemicals present so make certain that the person removing the instrument from the
box is capable of lifting this amount of weight.
YSI Environmental 8 Model 9600 Nitrate Monitor