Wlilplms bcb8in – SINGER W ET 10 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
WlilPlMS BCB8IN
1
.
3.
4.
Release clutch holding hand wheel and
turning clutch knob towards you.
Draw thread from spool through thread
guide as shown.
Pull end of thread through hole In bobbin
as shown.
Push bobbin winder shaft to far left
position, if it is not already there. Place
bobbin onto shaft with end of thread
coming from top of bobbin. Push bobbin
winder shaft to right until it clicks. Hold
onto end of thread.
5.
Stert machine. The thread that is held
will snap. Bobbin will cease turning when
completely filled. Push shaft to left to
remove bobbin.
6
. Tighten clutch knob and remove bobbin.
8
Advertising
This manual is related to the following products: