Presser feet, Changing presser feet, Darning plate – SINGER W ET 10 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRESSER FEET
This machine is fitted with a zigzag presser
foot for general sewing purposes. In the
accessor/ box are the
following additional
presser feet;
1. Straight stitch foot
2. Zipper foot
3. Blind hem foot
CHANGING PRESSER FEET
Be sure needle is in the up position. Raise
presser foot lever.
Snap-on presser feel
1. Raise foot release lever to remove the
foot. (Fig. 1)
2. Place the desired foot on the needle plate
aligning needle holes. (Fig. 1 )
3. Lower the presser foot lever so that the
foot holder snaps on the foot. (Fig. 2)
Fig. 1
Fig. 2
DARNING PLATE
There are a few times when you want to
control the feeding of the fabric yourself.
Raise needle to its highest position and raise
presser foot., Attach darning plate over
needle plate aligning two pins of darning
plate with holes of needle plate. You may
then determine the movement of the fabric
yourself.