Turning a corner using a, Twin top-stitching, Twin needle – SINGER W ET 10 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
.; ■ . .. ■:....................................
V /
I
TURNING A CORNER USING A
TWIN NEEDLE
1. Use the hand wheel to stop stitching with
the right-hand needle (the longer of the
two) just piercing the fabric. Turn the
fabric through 45°
Take one stitch, leaving the right-hand
needle piercing the fabric again, and turn
the fabric through another 45°. Continue
sewing.
PIN TUCKS
SETTINGS
Stitch selector -
Stitch length -
2-3
For making pin tucks on shirts and dresses in
fine fabrics, set your machine as above.
Sew one row of double stitches and remove
the fabric. Sewing in ihe same direction,
make parallel rows of double stitches 1 /12” -
3 / 1 2 " ( 2 - 6 mm) apart.
TWIN TOP-STITCHING
For twin lop-stitching of lapels, collars, cuffs
etc., set your machine as follows:
I
Stitch selector -
|
Stitch length -
3 - 4
*>-*• < '.r*- '■‘-r
40