Seweise stitch leveh, Seam .3uide limes – SINGER W ET 10 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWEiSE STITCH LEVEH
It is best to begin and end seams with a few
stitches made in reverse. This is called
'backtacking', which fastens the ends of the
seams and prevents unravelling.
To achieve reverse sewing, push down the
(Over as shown, and hold there during sewing.
I
he fabric will feed backwards until you
release the lever, when it will feed forward
again.
\
Reverse stitch lever
SEAM .3UIDE LIMES
To help you sew straight seams and seams of
uniform width, guide lines have been printed
on the needle plate either side of the needle.
As a standard seam is 5/8” (16 mm) these
lines have been extended in front of, and
beyond the needle.
’
The 'cross lines' are 'cornering guides' which
help when turning a square corner
5
/
8
”
(16 mm) from the fabric edge. Further details
of this can be found on page
20
.
17