Overcastliye toot, Roller foot, Leather/suede – SINGER W ET 10 User Manual
Page 40: Plastic, Velvet
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
This special foot is used to guide the fabric
when overcasting. Use a zig-zag width so
that the needle will span the metal spring on
Place the fabric so that the metal spring on
the foot rides on the right edge of the fabric.
Zig-zag stitch around the raw edge of the
fabric so that it is completely covered.
When sewing leather, suede, plastic and
velvet, fit the roller foot to aid the smooth
flow of fabric. However, especially when
sewing softer leather and suede, better
results may be achieved by using the normal
It is easy to sew leather and suede with this
machine to make clothes, bags, belts, purses
etc, but remember that a longer stitch length
IS usually required. You can seam, top-stitch,
satin stitch, embroider, monogram, appliqué,
patchwork, and apply decorative stitches
-just as you can with other fabrics.
For good results, use a longer stitch length
and use only straight stitch or zig-zag.
Use the roller foot to prevent presser foot
marks appearing on velvet. Otherwise sew as