Fitting shank and, Quilting seam guide, Fitting of presser feet – SINGER W1766 User Manual
Page 10: Fitting shank and quilting seam guide
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
QUILTING SEAM GUIDE
Raise the presser bar and fit shank as
carefully so as not to damage the holding
FITTING OF PRESSER FEET
Raise the presser foot Pull the one-touch
lever towards you and the foot will be
released. Centre new foot under shank.
Lower shank until groove is directly
above and touching the pin. Pull one-
touch lever towards you and the foot will
become engaged. (3, 4)