SINGER W1766 - Manual (Page 11)

WINDING THE BOBBIN
1 . Release stc^ motion knob.
2. Thread as shown.
3. Place bobbin onto spindle
and hand-wind thread onto
bobbin in an anti clockwise
direction for 5 or 6 turns.
(When bobbin is filled re-tighten
stop motion knob)
correct
screw
IHI
S l
4. Push bobbin winder spindle
against stopper, in direction
of arrow, and depress foot
pedal.
5. When bobbin winding is com­
pleted return spindle to its
original position.
Note;
If the bobbin winding should be
uneven (it is factory set) the
thread guide can be raised or
lowered to achieve the correct
winding.
Remove the top cover and adjust
with a suitable tool.