To start sewing, To finish seam – SINGER W1766 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO START SEWING
Raise the take-up lever to its hipest position when starting and stowing
Hold both threads about 10 cms to the rear of machine for the first two or
Sufficient fabric should be placed under needle before lowering presser foot.
Depress foot/Speed control and start to sew.
Test the machine stitches on a scrap of fabric you plan to use, adjusting the
machine for the length of stitch and tension suitable to your fabric.
When turning the hand wheel manually, always turn it toward you.
Guide the cloth (pntly with your hand.
To prevent breaking needle always stop with the needle out of the fabric.
TO FINISH SEAM
1. Sew to the edge of seam.
2. Push the reverse button and sew in reverse for
3. Raise needle to its highest position.
4. Lift presser foot and pull out the fabric to rear
5. Cut threads, as shown, on the thread cutter.