Changing sewing directions, Drawing up bobbin thread – SINGER W1766 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
DRAWING UP BOBBIN THREAD
Hold the top thread with a slight tension in your left hand and rotate the hand
wheel towards you so that the needle goes down and up again, then gently pull
your thread out towards the rear and under your sewing foot and you are ready
to start sewing.
CHANGING SEWING DIRECTIONS
Lower needle down into fabric and
raise presser foot, pivot the fabric
around the needle to change direction
as desired.
-10
2. Put down presser foot and
start to sew.
Advertising